Sale!

Bien Air Lubricare 2

Technical Data

  • Cycle duration – 20 seconds turbine, 40 seconds’ contra-angle.
  • Capacity – 4 ways (2 cleaning, 2 lubricating) and 1 chuck lane
  • Rating – AC 100 V to 240 V, 50/60 Hz
  • Power consumption – 10 VA to 25 VA
  • Air flow rate – 60 NL/min to 100 NL/min (0.3 MPa to 0.5 MPa)
  • Air pressure – 0.3 MPa to 0.5 MPa (recommended 0.4 MPa)
  • Outer dimensions (WxDxH) – 300 x 300 x 365 mm
  • Warranty – 2 Years

Includes

  • 1 x Duo pack maintenance (Spraynet & Lubrifluid)
  • Free training on the Reprocessing of Dental Handpieces

£1,795.00 excl. Vat

Additional information

Bien Air Lubricare 2

Fast, effective, and cost-saving maintenance – The Lubricare 2 automatically performs maintenance (cleaning and lubrication) of dental handpieces, which are essential for daily practice.

Up to four handpieces in a short time – Only 20 seconds. Thanks to different preprogrammed operating modes suitable for each specific handpiece, Lubricare 2 can automatically perform maintenance of up to four handpieces in a short time. It cleans a turbine in approximately 20 seconds and a contra-anlge in 40 seconds.

Clean Airblow System – By employing the dual solenoid valves system and a clean air dedicated conduit, the system can supply clean air without a mix of oil. During the water removal process before lubrication, the system removes the water in the head, which maximises lubrication results and minimises any idling period before use.

Spraynet, its best companion – To achieve the best outcomes, Bien Air highly recommends using Spraynet, which is proven to reduce 99.99% of the microbial load.

 

 

 

 

 

 

 

 

Easy maintenance – The control panel is flat for easy cleaning, and the front door can be removed for improved access. Lubricare 2 incorporates a built-in oil mist suction mechanism to prevent aerosol diffusion when in use.

Cost-saving – Reduction of oil consumption by 4 times When using Lubricare 2, oil consumption is reduced by 4 times compared to manual procedure, thus allowing for a faster maintenance with excellent cost savings.

Removable front door – The front door can be removed for improved access. Lubricare 2 incorporates a built-in oil mist suction mechanism to prevent aerosol diffusion when in use.

Flat control panel – The control panel is flat for easy cleaning.

Full compatibility – Lubricare 2 is compatible with handpieces and cleaning or lubrication products from other manufacturers. Additional couplings or spray holder may be needed.

View More Bien Air Products!

Product Number: 1601156-001